Status Window

Features

LED Panel
Event Log
Traffic Counter
IP Routing Table
DHCP Table

Explanation

• LED Panel
  From the EZRider click on the Status button, and then select the LED Panel tab. Front panel LED display shows the current status of the router. It also shows the status of the analog modem connection with respect to the connection profile. By clicking on Show Detail button, the LAN-In IP will be displayed.
  

• Event Log
  Click on the Event Log button, the Event log will appear as an independent window from the Status window. The Event log gives you the date and time an analog connectivity problem occurred. Every time you close Status the Event Log will reset. If you want to save the contents of the log you may do so by clicking on the Save Event Log button and save the file to your computer's hard drive or to a 3.5" floppy disk.
  
  
• Traffic Counter
  Click on the Show Details button, and then select the Traffic Counter tab. The Traffic Counter tab displays real-time data traffic counters for LAN, WAN and Analog modem interface. For each interface, cumulative totals are displayed for Sent Packet, Received Packets, Send Bytes, and Received Bytes.
  
  
• IP Routing Table
  Click on the Show Details button, and then select the IP Routing Table tab. The IP Routing Table tab displays all the static, user-defined IP routes and the dynamic loopback IP routes. For each route listed the IP Routing Table tab will display the Destination IP Address, Subnet Mask, Gateway, and Interface type.
  If you disconnect and reconnect, the list of loopback IP routes can change. To update and display the changes in the IP Routing Table tab, click the Refresh IP Routing Table button.
  
  
• DHCP Table
  Click on the Show Details button, and then select the DHCP Table tab. The DHCP Table tab lists all the DHCP assignment made by the Apex 1100 router. For each DHCP assignment listed, the DHCP Table tab displays the Host Name, MAC Address, IP Address, and current Status. If the DHCP Lease Time has not expired then the DHCP assignment status will show as being Active, otherwise it will show as being expired.
  As users log-on and log-off the network, the list of DHCP assignments can change. To update and display the changes in the DHCP Table tab, click the Refresh DHCP Table button.